1965-1970 Mustang Aluminum Driveshaft, T5 or AOD Conversion
We will be Closed for Good Friday (March 29th)
1964 to 1973 Mustang
- Gift Ideas & Accessories
- Aftermarket Seats
- Audio
- Billet Accessories
- Body Parts And Sheet Metal
- Body Shells
- Books/Literature/CD ROM
- Brakes
- Bumper
- Convertible Parts
- Cooling
- Cougar Only
- Decals
- Differential
- Door, Engine and Axle Tags
- Door Parts
- Driveshafts, U joints, and Related Parts
- Electrical
- Emblems
- Engine
- Exhaust
- Fuel and Intake
- Glass and Frames
- Grill Corrals, Bars, Ornaments and Emblems
- Grilles
- Hardware
- Heater/Air Conditioning
- Interior
- Lock Parts
- Lubricants
- Mirrors
- Moldings
- Money Saving Kits
- Paint and Restoration Supplies
- Rubber / Weatherstripping
- Sound and Heat Insulation
- Steering / Suspension
- Stripe Kits And Paint Stencils
- Superchargers and Accessories
- Tires
- Transmission And Clutch
- Trunk Area Parts
- Turbochargers
- Wheels And Related Parts
- Windshield Washer and Wiper Parts
Free up some rotating mass with Dynotech's aluminum driveshaft for your 1965-1970 Pony! Made from 3.5" tubing, this driveshaft will lower your ET's at the track. This driveshaft is 1" shorter than the stock unit to accommodate for the the length difference of AOD and T5 transmissions. This driveshaft includes heavy duty 1330 style u joint caps, which measure 3.62" wide, with 1.062 diameter caps. If you are using the factory yoke and differential with 1310 (3.219" wide with 1.062" diameter caps) size u joints, be sure to order hybrid 1310/1330 U joints. Please check the length you need and make sure this 46-19/32" length will do the trick as these are NON RETURNABLE.
- Front and Rear U-Joints included
- 3.5" Aluminum Shaft
- 1" Shorter than stock to fit AOD or T5 Conversion
- 50" Long