Call Us Toll-Free: 1-888-707-0774
Don't have an account? Create One   Find Us on Facebook   Follow Us on Instagram   Your Canadian Shelby Apparel and Parts Dealer

2005-2010 Mustang BMR Front Sway Bar, 35mm Adjustable, GRAY

We will be Closed for Good Friday (March 29th)

Click Any Photo to Enlarge

Manufactured from heavy-wall 35mm DOM tubing, the SB022 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. Thrust washers are welded to the bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection. The sway bar is 3-way adjustable to tune the amount of torsional spring rate and to determine the handling characteristics (understeer/oversteer) of the vehicle. BMR Suspension designed the SB022 sway bar for street performance, autocross, and road race applications. The large adjustable sway bar's three positions give you the versatility to drive to and from the road course or autocross and still out handle the competition with the same sway bar. The rate increases and adjustability allow you to fine-tune the handling characteristics of your Mustang so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength in the lightest package possible. This means increased performance with no sacrifices. The SB022 attaches to your Mustang with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension! This version comes in BMR's hammertone (GRAY) powdercoat finish for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!

More ...

Manufactured / Distributed By:
BMR Suspension Logo

Also Found in:

Order Securely Online - Check the Part Numbers you wish to order

Part # Price
SB022H $410.13