COIL SPRING SPACER/INSULATOR 1/2in POLY (ONE PER BOX)
1964 to 1973 Mustang
- Gift Ideas & Accessories
- Aftermarket Seats
- Audio
- Billet Accessories
- Body Parts And Sheet Metal
- Body Shells
- Books/Literature/CD ROM
- Brakes
- Bumper
- Convertible Parts
- Cooling
- Cougar Only
- Decals
- Differential
- Door, Engine and Axle Tags
- Door Parts
- Driveshafts, U joints, and Related Parts
- Electrical
- Emblems
- Engine
- Exhaust
- Fuel and Intake
- Glass and Frames
- Grill Corrals, Bars, Ornaments and Emblems
- Grilles
- Hardware
- Heater/Air Conditioning
- Interior
- Lock Parts
- Lubricants
- Mirrors
- Moldings
- Money Saving Kits
- Paint and Restoration Supplies
- Rubber / Weatherstripping
- Sound and Heat Insulation
- Steering / Suspension
- Stripe Kits And Paint Stencils
- Superchargers and Accessories
- Tires
- Transmission And Clutch
- Trunk Area Parts
- Turbochargers
- Wheels And Related Parts
- Windshield Washer and Wiper Parts
Click Any Photo to Enlarge
A quick and inexpensive way of lifting your car is by using a coil spring spacer. The spacers are installed between the coil spring and the shock tower, not in between the coils. The car will raise twice the height of the spacer. Therefore this 1/2 inch spacer equals about 1 inch of ride height change at the wheel. The spacer sits on top of the spring and does not change the spring rate. It simply raises the car.
Reasons to lift the car:
- To raise ride height if it is too low
- To level the car if it tilts to one side
- For weight jacking if the car is being raced
