1965-1973 Mustang Pertronix Electronic Ignition Conversions
1964 to 1973 Mustang
- Gift Ideas & Accessories
- Aftermarket Seats
- Audio
- Billet Accessories
- Body Parts And Sheet Metal
- Body Shells
- Books/Literature/CD ROM
- Brakes
- Bumper
- Convertible Parts
- Cooling
- Cougar Only
- Decals
- Differential
- Door, Engine and Axle Tags
- Door Parts
- Driveshafts, U joints, and Related Parts
- Electrical
- Emblems
- Engine
- Exhaust
- Fuel and Intake
- Glass and Frames
- Grill Corrals, Bars, Ornaments and Emblems
- Grilles
- Hardware
- Heater/Air Conditioning
- Interior
- Lock Parts
- Lubricants
- Mirrors
- Moldings
- Money Saving Kits
- Paint and Restoration Supplies
- Rubber / Weatherstripping
- Sound and Heat Insulation
- Steering / Suspension
- Stripe Kits And Paint Stencils
- Superchargers and Accessories
- Tires
- Transmission And Clutch
- Trunk Area Parts
- Turbochargers
- Wheels And Related Parts
- Windshield Washer and Wiper Parts
Click Any Photo to Enlarge
A solid-state electronic system... "never change points again!"
Test results show the Ignitor delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy and plug life.
A 2:1 improvement over point type systems in current fall time for increased coil output.
System is designed for use with most point-type coils, optimal performance achieved when used with our Flame-Thrower 40,000 volt coil.
Fits entirely inside the distributor, no "black box" to clutter your engine compartment. Stable timing... no need for any adjustments.
No complicated wiring makes installations easy. Compatible with 12-volt negative ground systems (some applications available for 6-V negative ground and 6 and 12-V positive ground systems)
Works great in stock point-type distributors as a trigger for multi spark CD ignitions, eliminating the need for expensive aftermarket distributors.
The Ignitor II is designed for those who want to get every last ounce of potential out of their factory high performance or modified engines. It has a variable dwell feature as found on HEI distributors to give increased coil charge time at higher RPM.
The Ignitor II has a built-in safety feature that switches off the unit if it is wired improperly or if the key is left in the "on" position without the engine running. This prevents the possible overheating of the Ignitor II/Coil circuit.
Manufactured / Distributed By:
Also Found in:
