Trickflow Stage 2 Hydraulic Roller Camshaft
1994 to 2004 Mustang
- Gift Ideas & Accessories
- Books and Manuals
- Brakes
- Convertible
- Cooling System
- Custom Tuning and Calibration
- Decals
- Differential
- Electrical
- Engine
- Exhaust
- Exterior
- Fuel System
- Heat and Air Conditioning
- Ignition
- Interior
- Lubricants
- Stripes and Decals
- Suspension and Steering
- Transmission
- Trunk Area Parts
- Turbochargers
- Weatherstripping and Rubber Parts
- Wheel and Tire
- Windshield Wiper and Washer Parts
Click Any Photo to Enlarge
Specifically designed to match the power characteristics of our Trick Flow cylinder heads for Ford, these Track Heat cams offer state-of-the-art power at an affordable price.
Starting as premium blank cores, the cams are checked for proper hardness, then precision-ground to exacting tolerances. Instead of creating a steep, narrow powerband that falls off very quickly, these cams powerbands achieve maximum area under the curve to enhance the broad torque and horsepower curves of the Trick Flow cylinder heads. Good idle, strong midrange power. Aftermarket intake, heads, and headers recommended. Requires modified mass airflow. Compression ratio: 9:1 to 10.5:1.
- Advertised duration: 286 intake/294 exhaust
- Duration at .050 in. lift: 224 intake/232 exhaust
- Gross lift: .542 in. intake/.563 in. exhaust
- Lobe separation: 112 degrees
- RPM range: 2,500 to 6,000
Manufactured / Distributed By:
Also Found in:
