Zeitronix ZT-2 Wideband Air Fuel Ratio Meters and Datalogging Systems

Fully digital, smallest wideband O2 controller and datalogging system in the world!
Zt-2 is about the size of 1" thick business card. Extremely compact design for installation where space is a premium.

Zt-2 Specs
-0.1 AFR accuracy
-Operating voltage 10V to 18V
-Switching power supply for oxygen sensor heater
-Precise sensor temperature control
-Reverse polarity protection
-Integrated self-resetting fuse
-Positive lock connectors
-Protected inputs and outputs
-Flexible Plug and Play Sensor Harness with a small, easy to route through the fire wall, connector
-Wideband Oxygen Sensor included
-Easy to install plug and play kit
-Adjustable Narrowband Switching Point
-Warning Alarms and Triggers
-Made in USA
Inputs/Outputs:
Bosch Wideband O2 sensor Input
Linear Wideband Output AFR = Volts * 2 + 9.6
Serial data output to the Zeitronix LCD, ZR-1 AFR, and ZR-2 Multi-Gauge Displays
Serial data output for real time datalogging (PC laptop required)
RPM Input (tachometer, primary side ignition coil, crank, cam sensor).
The RPM input works in any car and any ignition system. No additional adapters needed!Wideband Oxygen Sensor
Simulated and adjustable Narrowband Output to feed a stock ECU
Throttle Position Sensor Input
Boost (MAP) Sensor Input:

• 50 PSI (3.5 Bar) MAP Sensor, or 75 PSI (5.0 Bar) MAP sensor or
  150 PSI (10 Bar) MAP sensor
  Exhaust Gas Temperature (EGT) probe Input
  User1 Input:
• 0-5 volt analog input. Voltage data is viewable on all models of the LCD display.
  Software support for the display of Zeitronix pressure sensors.
• Customized data conversions can be entered to match 0-5 volt sensor specifications.
  All converted User1 data values are displayed only in the software.
  User2 Input:
• 0-5 volt analog input OR configurable to be used with Fuel/Oil/Boost pressure sensors and Air/Water/Oil/Transmission temperature sensors.
• Data is displayed on the 2010 Model LCD and ZR-2 Multi-gauge as a pressure or temperature.
• Zeitronix Data Logger software will display and log data according to sensor type.
• Customized data conversions can be entered to match 0-5 volt sensor specifications.
  Customized data conversion values are displayed in the Zeitronix Data Logger software only.
  Warning Output for use with ZAVT-1 warning/trigger box
  5V output for sensors

Items included with each Zt-2 Kit order:
-Zt-2 Wideband Controller
-Bosch 5 wire Wideband Oxygen Sensor
-Oxygen Sensor Harness (10 feet length), *Substitute a 3ft or 20ft oxygen sensor harness.
-Signal Harness
-Serial datalogging cable with RJ-12 to DB-9 converting plug
-Zeitronix Data Logger software
-Instructions
-2 pin connector for the EGT input